Rockwell Automation 6181P-xxxx Integrated Display Computers, Series A to D - Manual (Page 22)

22 Publication 6181P-UM001G-EN-P - July 2008
Chapter 2 Installation
Mounting Guidelines
Observe these guidelines when installing the computer on an arm:
•
The mounting surface must be strong enough to support both
the computer and the mounting hardware.
•
The mounting arm must be strong enough to support the
computer. The arm must meet VESA FPMPMI 100 mm standards.
•
The mounting location must provide clearance for mounting and
positioning the adjustable unit and routing cables.
•
Per UL Listing restrictions, the product must be mounted with a
tilt of +/- 30° or less from vertical.
Mount the Computer on a Bench or Tabletop
1. Mount the arm to the benchtop or tabletop using screws, bolts,
or clamps so the computer cannot tip.
2. Place the computer over the arm, and insert four M4 x 0.7
screws through the arm brackets and into the back cover of the
computer.
3. Tighten the screws.