Rockwell Automation 6181P-xxxx Integrated Display Computers, Series A to D - Manual (Page 15)

15 Publication 6181P-UM001G-EN-P - July 2008 15
Chapter
2
Installation
Chapter Objective This chapter describes how to install your computer in a panel and
how to make connections. It covers the following topics:
•
European Union Directive Compliance
•
Environment and enclosures
•
Installation considerations
•
Mounting clearances
•
Mounting the computer in a panel
•
Mounting the computer on a bench or tabletop
•
Product dimensions
•
Connect a keyboard or mouse
•
Connect AC or DC power
•
Connect to a network
European Union
Compliance This product meets the European Union Directive requirements when
installed within the European Union or EEA regions and has the CE
mark. A copy of the Declaration of Conformity is available at the
Rockwell Automation / Allen-Bradley website:
www.ab.com/certification.
ATTENTION
This product is intended to operate in an industrial or control
room environment, which utilizes some form of power isolation
from the public low voltage mains. Some computer
configurations may not comply with the EN 61000-3-2
Harmonic Emissions standard as specified by the EMC Directive
of the European Union. Obtain permission from the local power
authority before connecting any computer configuration that
draws more than 75 watts of AC power directly from the public
mains.
ATTENTION
To comply with EN 55024, the Ethernet port LAN cable must be
less than 30 m (98.42 ft) long, and it must only be used indoors
(i.e., not exit the building at any point). All other I/O cables must
be less than 3 m (9.842 ft) long, and must only be used indoors.