Rockwell Automation 2711 PanelBuilder Software Getting Started - Manual (Page 9)

Preface P–4
Publication 2711-6.2
PanelView Operator Terminal
The sample application operates with all of PanelView terminals.
The differences are in the:
•
display type (monochrome or color)
•
operator input (touch screen or keypad)
•
communication ports (Remote I/O, DH-485, RS-232, DH+)
Download Cables
Remote I/O, RS-232 or DH+ Versions of PanelView Terminals
Theses PanelView terminals require one of the following cables to
download applications using an RS-232 connection:
•
Catalog No. 2711-NC13
•
Catalog No. 2711-NC14
•
Catalog No. 2706-NC13
The only difference between the cables is the cable length.
DH-485 Versions of PanelView Terminals
The DH-485 versions of the PanelView terminals require the
following items to download applications:
•
Personal Computer Interface Converter (Catalog No. 1747-PIC)
•
Communications Cable (Catalog No. 1747-C10, -C11, -C20)
The Personal Computer Interface Converter receives power from an
SLC controller. Downloading an application to the terminal without
an SLC connected requires a power supply (Catalog No. 1747-NP1)
or a powered Link Coupler (Catalog No. 1747-AIC).
Communication Cable
A communication cable is required to connect the PanelView
terminal to a PLC or SLC controller.
Remote I/O Versions of PanelView Terminals
The Remote I/O versions of the PanelView terminals connect to a
PLC controller using Remote I/O cable (Catalog No. 1770-CD),
which is equivalent to the Belden 9463 cable.