Rockwell Automation 2711 PanelBuilder Software Getting Started - Manual (Page 85)

6–2 Entering the Application Tags
Publication 2711-6.2
The following tables list tag data for:
•
DH-485/DH+ applications communicating with an SLC or PLC
controller. The tag data is the same for these applications.
For DH+ applications communicating with a PLC, it is okay to
leave SLC_1 in the Node Name field.
•
Remote I/O application communicating with a PLC controller
Refer to the appropriate table when entering tags in the next section.
Tags for DH-485 or DH+ Getting Started Application (Project GS)
Tag Name Data Type Description
Node Name➀
(Controller)
Tag
Address
Initial
Value
Update
Frequency
Messages Unsigned Integer Displays alarm messages. SLC_1 N7:3 0 1
Motor_AutoManual Unsigned Integer Motor auto/manual indication. SLC_1 N7:0 0 1
Motor_Speed Unsigned Integer Controls motor speed. SLC_1 N7:1 0 1
Motor_Speed_Dec Bit Decrements motor speed. SLC_1 B3:0/3 0 1
Motor_Speed_Inc Bit Increments motor speed. SLC_1 B3:0/2 0 1
Motor_Speed_Ind Unsigned Integer Indicates motor speed. SLC_1 N7:2 0 1
Motor_Start Bit Starts motor. SLC_1 B3:0/0 0 1
Motor_Start_Ind Bit Motor start indication. SLC_1 B3:0/4 0 1
Motor_Stop Bit Stops motor. SLC_1 B3:0/1 0 1
Motor_Stop_Ind Bit Motor stop indication. SLC_1 B3:0/5 0 1
Tags for Remote I/O Getting Started Application (Project GSRIO)
Tag Name Data Type Description
Node Name
(Controller) Tag
Address
Initial
Value
Update
Frequency
Messages Unsigned Integer Displays alarm messages. PLC_RIO N7:4 0 1
Motor_AutoManual Unsigned Integer Motor auto/manual indication. PLC_RIO N7:10 0 1
Motor_AutoMan_Ind Unsigned Integer Motor auto/manual status
indication. PLC_RIO N7:3 0 1
Motor_Spd_Handshk Bit Motor speed handshake. PLC_RIO N7:2/2 0 1
Motor_Spd_Notify Bit Motor speed notification. PLC_RIO N7:11/4 0 1
Motor_Speed Unsigned Integer Controls motor speed. PLC_RIO N7:13 0 1
Motor_Speed_Dec Bit Decrements motor speed. PLC_RIO N7:11/0 0 1
Motor_Speed_Inc Bit Increments motor speed. PLC_RIO N7:11/1 0 1
Motor_Speed_Ind Unsigned Integer Indicates motor speed. PLC_RIO N7:1 0 1
Motor_Start Bit Starts motor. PLC_RIO I:010/10 0 1
Motor_Start_Ind Bit Motor start indication. PLC_RIO O:010/10 0 1
Motor_Stop Bit Stops motor. PLC_RIO I:010/11 0 1
Motor_Stop_Ind Bit Motor stop indication. PLC_RIO O:010/11 0 1
Overview of Tags