Rockwell Automation 2711 PanelBuilder Software Getting Started - Manual (Page 26)

2–5 Initial System Setup
Publication 2711-6.2
For DH-485 or DH+ applications that communicate with an SLC
controller, the required ladder logic program and data files are
supplied on the PanelBuilder installation disks.
The following files are installed in the C:\AB\SLC500\GS directory
during PanelBuilder installation.
SLC Ladder Logic Files
GETSTRTD.AC$
GETSTRTD.ACH
GETSTRTD.B0$
GETSTRTD.B1$
GETSTRTD.B2$
GETSTRTD.IX$ GETSTRTD.LX$
GETSTRTD.NAM
GETSTRTD.OP$
GETSTRTD.PC$
GETSTRTD.XD$
GETSTRTD.XO$
Run the APS software installed on your computer and load the
ladder logic program into the SLC controller. Appendix A contains
the documented ladder logic program.
For details on how to use the Advanced Programming Software refer
to the appropriate manuals.
For Remote I/O and DH+ applications that communicate with a
PLC5 controller, the required ladder logic program and data files are
supplied on the PanelBuilder installation disks.
The following files are installed in the C:\AB\PLC5\GS directory
during PanelBuilder installation.
PLC (RIO) Ladder Logic Files PLC (DH+) Ladder Logic Files
GSRIO.AC$
GSRIO.AF5
GSRIO.B0$
GSRIO.B1$
GSRIO.D1$
GSRIO.IX$ GSRIO.LX$
GSRIO.OP$
GSRIO.P1$
GSRIO.PC$
GSRIO.TTL GSDHP.AF5
GSDHP.AC$
GSDHP.B0$
GSDHP.B1$
GSDHP.D1$
GSDHP.IX$ GSDHP.LX$
GSDHP.OP$
GSDHP.P1$
GSDHP.PC$
Load the ladder logic program into the PLC controller. Appendix B
contains the ladder logic for the Remote I/O application. Appendix C
contains the ladder logic for the DH+ application.
For details on how to load the ladder logic program into the PLC
controller, to the appropriate user manuals.
Loading the SLC
Ladder Logic Program
Loading the PLC
Ladder Logic Program