Rockwell Automation 2711 PanelBuilder Software Getting Started - Manual (Page 10)

Preface P–5
Publication 2711-6.2
DH-485 Versions of PanelView Terminals
The DH-485 versions of the PanelView terminals require one of the
following:
•
Catalog No. 1747-C10
•
Catalog No. 1747-C11
•
Catalog No. 1747-C20
The only difference between the cables is the cable length.
RS-232 Versions of PanelView Terminals
The RS-232 versions of the PanelView terminals use the same cable
for downloading and communications.
•
Catalog No. 2711-NC13
•
Catalog No. 2711-NC14
•
Catalog No. 2706-NC13
DH+ Versions of PanelView Terminals
The DH+ versions of the PanelView terminals connect to a DH+ link
using a Belden 9463 cable (Catalog No. 1770-CD).
PLC or SLC Controller
Remote I/O Versions of PanelView Terminals
The Remote I/O versions of the PanelView terminal operate with a
PLC 5 or SLC controller (with a 1747-SN Scanner). The sample
application uses a PLC 5/25 controller.
DH-485 Versions of PanelView Terminals
The DH-485 versions of the PanelView terminal operate with both
fixed and modular style SLC 500 controllers.
RS-232 Versions of PanelView Terminals
The RS-232 versions of the PanelView terminal require an SLC 5/03
or 5/04 controller.
DH+ Version of PanelView Terminals
The DH+ versions of the PanelView terminal operate with either a
PLC 5 or SLC controller. The sample application uses a PLC 5/25
controller.