Rockwell Automation 2711 PanelBuilder Software Getting Started - Manual (Page 64)

4–30 Creating the Sample Application
Publication 2711-6.2
4. Click the Copy tool.
5. Double-click the control-menu box of screen 1 or choose Close
from the Screen menu to close the screen.
Control-menu box
6. Activate screen 2 by clicking the title bar of the screen or
choosing MOTOR SPEED from the Window menu.
7. Click the Paste tool.
8. Move the outline to the lower right corner of the screen and click
the left mouse button.
To change the inner text of the copied screen button:
1. Click the Inner Text tool.
2. Replace
MOTOR
SPEED
F8
with
MOTOR
STATUS
F8
ENTER key pressed twice
Don’t worry if this number is different.
3. Click to exit inner text mode.
To change the properties of the copied screen button:
1. Double-click the object to open its dialog.
2. Set the properties as shown below.
Select Motor Speed
Select F8 for PV900/PV1400 terminals
Select F5 for PV550/PV600 terminals
MOTOR STATUS
3. Click OK to close the dialog.
Creating the
Motor Speed Screen