Rockwell Automation 6189V-xxxx Non-display Industrial Computers User Manual - Manual (Page 95)

Rockwell Automation Publication 6177R-UM002D-EN-P - October 2014 95
Appendix
B
Accessories Installation
Objectives This appendix provides information on how to install accessories available for
this computer.
This appendix covers the following topics:
• Pre-installation Checklist
• Install a Second HDD
• Install I/O Card Retention Bracket
• Install an Add-in Card
• Install Rack Slides (1450R Computer)
• Install More Memory
You can view a current list of accessories at this Rockwell Automation website at
http://ab.rockwellautomation.com/Computers .
Pre-installation Checklist Review the following information before you install any accessories:
• Voltage Precautions on page 35
• Electrostatic Discharge Precautions on page 36
Install a Second HDD You can install another HDD in the secondary bay (SATA 1). All 6177R
computers have two HDD bays but only server models have two HDDs that are
pre-installed.
Follow these steps to install a second HDD.
1. Follow the steps for Pre-configuration on page 36 .
2. 1450R computers: perform step 2 on page 40 before proceeding to
step 3 .
ATTENTION: To avoid voiding your computer warranty, we recommend that
you use only Allen-Bradley approved accessories.
TIP Use an antistatic wriststrap that is connected to the work surface, and
properly grounded tools and equipment.