Rockwell Automation 6189V-xxxx Non-display Industrial Computers User Manual - Manual (Page 39)

Rockwell Automation Publication 6177R-UM002D-EN-P - October 2014 39
Component Replacement Chapter 4
Reinstall the Cover Follow these steps to reinstall the side cover for the 750R computer or the top
cover for the 1450R computer.
1. Verify that the computer is in the upright position.
2. Follow step 1 through step 3 of the Post-configuration on page 37 .
3. Position the cover so its hinge tabs align and engage the lock slots on the
chassis (A).
Tilt the cover slightly to make sure that all hinge tabs are engaged and
locked properly.
4. Slide the cover forward to lock the hinge tabs into place (B).
5. Secure the cover to the computer chassis.
• 750R computers: Reinstall the three screws on the rear edge of the side
cover (C).
• 1450R computers: Reinstall the two screws on the rear edge of the top
cover (C).
6. Torque the screws to 0.6 N•m (5.2 lb•in).
750R Computer
1450R Computer
C
C
C
A
B
A
B
C
B A
B A
C