Rockwell Automation 6189V-xxxx Non-display Industrial Computers User Manual User Manual
Page 103
Rockwell Automation Publication 6177R-UM002D-EN-P - October 2014
103
Accessories Installation
Appendix B
5. Align the rack slides to the corresponding slides inside the cabinet, and
insert the rack slides attached to the server into the mounting rails (H).
6. Depress the locking latch and push the computer completely into the rack
until you hear a click sound (G).
See
step 1
on
page 102
for further information.
7. Secure the computer to the front of the rack cabinet by using four screws
(H).
Torque the screws to 1.3 N•m (12.1 lb•in).
8. Align the rack slides to each slide inside the cabinet, and insert the rack
slides attached to the server into the mounting rails (H).
9. Depress the locking latch and push the computer completely into the rack
until you hear a click sound (I).
for further information.
TIP
For ease of installation, make sure two or more people help to install
the computer.
C
C
E
E
D
D
F
F
G
H
I
J