Rockwell Automation 6189V-xxxx Non-display Industrial Computers User Manual - Manual (Page 54)

54 Rockwell Automation Publication 6177R-UM002D-EN-P - October 2014
Chapter 5 UEFI Set-up Utility
Firmware Configuration You can view and modify the various system parameters from the Firmware
Configuration menu. On the left are six menu options that are stacked vertically.
Common Buttons at the Bottom of Screens
Most screens have these common buttons.
Menu Description
Main Use this menu to view general computer information and for basic system configuration.
Advanced Use this menu to configure information for the PXE, PCI, ACPI, processor, SATA, USB,
power, video graphics, super I/O, hardware display, and AMT.
Chipset Use this menu to configure system chipset information.
Boot Use this menu to configure boot device priority.
Security Use this menu to set or change user and administrator passwords.
Save and Exit Allows you to save changes and reset, discard changes and reset, or restore defaults.
Button Description
Help Click for general help on how to use the set-up utility.
Default Click to load the default values for all set-up options.
Restore Click to restore all set-up options to previously saved values.
Save Click to save configuration changes.
Previous (not shown) Click to navigate to the previous page.
Exit Click to close the set-up utility.