Rockwell Automation 6189V-xxxx Non-display Industrial Computers User Manual - Manual (Page 3)

Rockwell Automation Publication 6177R-UM002D-EN-P - October 2014 3
Summary of Changes
This manual contains new and updated information. Changes throughout this
revision are marked by change bars, as shown to the right of this paragraph.
New and Updated
Information This table contains the changes made to this revision.
Topic Page
Expanded Abbreviations table 10
Revised and added available operating systems 11
Added Important table 11
Added catalog numbers to table in ‘Computer Options’ section 12
Updated information in ‘Parts List’ section 13
Revised footnote information in ‘Hardware Features’ section 14, 15
Updated CISPR number in ‘Environment and Enclosure Information’ section 20
Added catalog numbers to table in ‘Mounting Hardware’ section 22
Revised information in ‘Functional Ground Screw’ section 29
Changed callout description in Figure 10 42
Revised information in ‘Replace or Add a Memory Module’ section 43
Revised information in ‘Set-up Screen Overview’ section 52
Revised information in both ‘SATA Configuration’ subsections 60, 61
Revised information in ‘Super I/O Configuration’ subsection 65
Consolidated ‘System Temperature History’ subsection into ‘Hardware Monitor’ subsection 67
Revised and added information in ‘Boot’ subsection 70
Revised and added information in ‘Security’ subsection 71
Added information in ‘Diagnostics’ section 73, 74
Added Important tables in ‘AMI Backup’ section 75, 76, 77
Added Important table in ‘AMI Restore’ section 79
Added information in ‘Diagnostics’ section 87
Added Important table in ‘Load the System Defaults’ section 88
Added information in ‘Clear the UEFI’ section 89
Added ‘Dispose of the Computer’ section 90
Added new catalog numbers to Table 5, Hardware and Software Specifications 91
Added new Table 6, Physical Specifications 92
Revised and added information in Table 9, Certifications 94