Rockwell Automation 5370-CUPK Color CVIM USER-PAK Option - Manual (Page 64)

Chapter 7
Creating Custom Runtime Displays
7 – 5
Tool Display Setting: With the Envir/Cam
→
System
→
Tool Display:
box set to ON , all viewports are displayed which have an assigned
display page and number in common with the currently selected viewport.
With
Tool Display: box set to OFF , only the current viewport is
displayed (see “Selecting Display Pages and Page Numbers” in this
chapter).
•
Pick the Define Viewport . . . box to access the Define Viewport menu
(see Figure 7.3).
Figure 7.3 Example Custom Runtime Display
Define Viewport box
Define Viewport menu
Using the Define Viewport Menu
With the Define Viewport menu displayed, you have access to the following
menu items:
•
Type: Select the viewport type – Text , Tool , or Graph .
•
Pick & Place: Adjust the viewport size and position. (Disabled if Tool
is the selected viewport type)
•
Border: * Set the color of the viewport display border.
•
Backg.: * Set the color of the viewport display background area.
•
Display Pages: Select the type(s) of runtime display that will display
the viewport.
•
Page #: Select the page number(s) of the runtime display(s) that will
display the viewport.
•
Erase Port Data: Permanently remove the contents of the viewport.