Rockwell Automation 5370-CUPK Color CVIM USER-PAK Option - Manual (Page 110)

Chapter 8
Defining Strings for Serial Ports and Viewports
8 – 21
The change color code changes the color for the portion of the string
displayed after the code. More than one change color code can be placed
within a string.
Table 8.B
Color Codes for Strings
No. Text Color Tool Color
1 Green Green
2 Yellow Yellow
3 Red Red
4 Orange Red
5 Blue Red
6 Brown Red
7 Black Red
8 Clear Clear
For example, suppose the following string text is entered, and is assigned the
color
Red using the Color Selection menu:
“Red” C1 “Green”
When the string is displayed, the literal text Red would be displayed in red.
The code
C1 would then change the remainder of the the string to green.
That is, the literal text Green would be displayed in green.
A formula indicator (%) can be used for the color code number. Thus the
color can be set dependent upon a formula result. For example, the code
C % 5 would use the result of formula 5 as the color number. If the result
were 7, for example, the string color would be changed to black.
Values Out Of Range: If the specified color number is less than 1, the value
1 is used (green). If the specified color number is greater than 8, the value 8
is used (clear).