Rockwell Automation 2090 Ultra3000 Installation Manual - Manual (Page 140)

Publication 2098-IN003E-EN-P — April 2004
A-2 Specifications and Dimensions
Ultra3000 Power
Specifications The following sections provide power specifications for the Ultra3000.
Ultra3000 (230V) Power Specifications
The table below lists general power specifications and requirements
for the Ultra3000 230V drives (2098-DSD-005x-xx, -010x-xx, and
-020x-xx).
1 Specification is for nominal voltage. The absolute limits are ±10%, or 88-265V
rms
.
2 The 2098-005x-xx, -010x-xx, and -020x-xx (230V) drives are limited to one contactor cycles per two minutes.
3 Power initialization requires a short period of inrush current. Dual element time delay (slow blow) fuses are
recommended (refer to Fuse Specifications on page A-5).
Specification
Description
2098-DSD-005 2098-DSD-010 2098-DSD-020
AC Input Voltage
1 100-240V
rms
Single Phase
AC Input Frequency 47 - 63 Hz
AC Input Current
2, 3
Nominal
Maximum inrush (230V ac input)
5A
rms
100A (0-peak)
9A
rms
100A (0-peak)
18A
rms
100A (0-peak)
Continuous Output Current 2.5A (0-peak) 5A (0-peak) 10A (0-peak)
Intermittent Output Current 7.5A (0-peak) 15A (0-peak) 30A (0-peak)
Bus Capacitance 1410 μF 1880 μF 1880 μF
Internal Shunt Resistance N/A N/A N/A
Shunt On N/A N/A N/A
Shunt Off N/A N/A N/A
Bus Overvoltage 400V dc 400V dc 400V dc
Energy Absorption Capability
115V ac input
230V ac input
93 Joules
38 Joules
125 Joules
51 Joules
Continuous Power Output
115V ac input
230V ac input
0.25 kW
0.5 kW
0.5 kW
1.0 kW
1.0 kW
2.0 kW
IMPORTANT
Only the 2098-DSD-005, -010, and -020 models
support an auxiliary +5V logic supply since an
auxiliary AC input is not available. Refer to Auxiliary
5V Logic Supply on page 2-26 for more information.