Rockwell Automation 1790P-T4T0 CompactBlock LDX I/O Thermocouple Modules - Manual (Page 95)

Publication 1790-UM003A-EN-P
Module Configuration for PROFIBUS E-7
10. When configuration is complete, click the OK button to close the
module properties screen.
Save the Configuration To close the configuration:
1. Choose File>Save As.
2. Specify a file name and location to save your configuration.
3. Click Save.
This saves your project as a .pbc (PROFIBUS configuration file).
Download the
Configuration To download the configuration:
1. Verify that the processor is in Program Mode.
2. Make sure the serial communication cable is connected between the
PC comm port and the scanner serial port.
3. Highlight Master in the Network pane.
Select the
thermocouple/mV
input type for each
channel from the
dropdown list.