Rockwell Automation 1790P-T4T0 CompactBlock LDX I/O Thermocouple Modules - Manual (Page 59)

Publication 1790-UM003A-EN-P
Specifications A-3
General Specifications
General Specifications
Wiring Category
2
1
1 Refer to publication 1770-4.1, Programmable Controller Wiring and Grounding Guidelines.
Product Certifications
(when product is marked) c-UL-us UL Listed for Class I, Division 2 Group A,B,C,D Hazardous
Locations, certified for U.S. and Canada
UR UL Recognized Component Industrial Control Equipment
CE
2
European Union 89/336/EEC EMC Directive, compliant with:
EN 61000-6-4; Industrial Emissions
EN 50082-2; Industrial Immunity
EN61326; Meas./Control/Lab., Industrial Requirements
EN 61000-6-2; Industrial Immunity
C-Tick
2
Australian Radiocommunications Act, compliant with:
AS/NZS 2064; Industrial Emissions
ODVA ODVA conformance tested to ODVA DeviceNet
specifications
2 See the Product Certification link at www.ab.com for Declarations of Conformity, Certificates and other certification
details.
DeviceNet Power Supply voltage - 24V dc nominal
Voltage range - 11-28.8V dc
Power dissipation - 1.2W maximum @ 28.8V dc
PROFIBUS Power Supply voltage - 24V dc nominal
Voltage range - 19.2-28.8V dc
Power dissipation - 2W maximum @ 28.8V dc
Field Power Supply Voltage - 24Vdc nominal
Voltage Range - 21.6-26.4V dc (+10%)
Power Dissipation - 1.5W maximum @ 26.4V dc
Isolation I/O to logic: photocoupler isolation
Isolation voltage: Type Test 1250V ac rms for 60 seconds
DeviceNet to logic: non-isolated
Field power: non-isolated
Indicators 4 red/green I/O status
Wiring
1790D-4R0
1790D-T4R0
37-pin D-Shell connector
Terminal block connector screw torque: 7 inch pounds maximum
IMPORTANT These modules do not support any expansion modules.