Rockwell Automation 1790P-T4T0 CompactBlock LDX I/O Thermocouple Modules - Manual (Page 11)

Publication 1790-UM003A-EN-P
Overview 1-3
Hardware Features The thermocouple/mV module contains either a fixed terminal block or a
removable D-sub connector, which provides connections for four inputs
for any combination of thermocouple and mV input devices. Channels are
wired as differential inputs. The illustration below shows the hardware
features of the module.
Figure 1.1 1790D-4T0/T4T0 DeviceNet Module
Figure 1.2 1790P-T4T0 PROFIBUS DP Module
Node Address
Switches
Module and Network
Status Indicators
43223
Thermoucouple/mV
Channel Indicators
Thermocouple/mV Connections
(D-sub Connector shown)
CompactBlock LDX
1790D-8BV8V
8 INPUTS/8OUT PUTS-DC POWE R
0
7 0
7
DeviceNet Network
Connection
DIN Rail Slot
Panel Mount
Hole
Node Address
Switches Module and Network
Status Indicators
Panel Mount
Hole
Thermocouple/mV
Channel Indicators
Thermocouple/mV
Connections (Terminal block)
PROFIBUS Network
Connector
DIN Rail Slot
Module Power Connector
(underneath module)
PROFIBUS
Connector
31341-M