Rockwell Automation 1790P-T4T0 CompactBlock LDX I/O Thermocouple Modules - Manual (Page 93)

Publication 1790-UM003A-EN-P
Module Configuration for PROFIBUS E-5
9. Click the Ext. Prms tab.
This is where the parameters that can be set for the slave
thermocouple/mV module are configured.
Module configuration parameters include watchdog time base,
temperature units, filter frequency, cold junction compensation
enable, manual offset and input thermocouple/mV type.
The 1790P-T4T0
module produces 5
words of data.
The produced 5
words will appear in
the processor input
data table.
On this screen, you
see all the
parameters for the
module. These
include watchdog
time, temperature
units, filter frequency,
cold junction
compensation enable,
manual offset and
input thermocouple/
mV type.
Select the watchdog
time base
(10 ms or 1 ms).