Input modules’ configuration file – Rockwell Automation 1769-OF2 Compact I/O Analog Modules User Manual
Page 145
Publication 1769-UM002B-EN-P - July 2005
Module Addressing and Configuration with MicroLogix 1500 B-3
Input Modules’ Configuration File
The configuration file contains information that you use to define the way a
specific channel functions. The configuration file is explained in more detail in
chapter 4.
The configuration file is modified using the programming software
configuration screen. For an example of module configuration using RSLogix
500, see Configuring Analog I/O Modules in a MicroLogix 1500 System on
page B-4.
TIP
The RSLogix 500 configuration default is to enable each
analog input channel. For improved analog input module
performance, disable any unused channels.
Table B.1 Software Configuration Channel Defaults
1769-IF4 and -IF8
1769-OF2, -OF8C, and -OF8V
Parameter
Default Setting
Parameter
Default Setting
Enable/Disable Channel
(1)
Enabled
Enable/Disable Channel
Enabled
Filter Selection
60 Hz
Output Range Selection
±10V dc
Input Range
±10V dc
Data Format
Raw/Proportional
Data Format
Raw/Proportional
(1)
The 1769-IF4, -IF8, -OF2, -OF8C, and -OF8V modules are disabled by default. You will need to enable the channels.