Introduction, Chapter, Determine module compatibility – Rockwell Automation 1732E-OB8M8SR EtherNet/IP Dual Port 8-Point SOE Input and Scheduled Output Modules UM User Manual
Page 69
Rockwell Automation Publication 1732E-UM003B-EN-E - March 2014
59
Chapter
9
Specific Features of the 1732E-OB8M8SR
Scheduled Output Module
Introduction
This chapter describes the features specific to the 1732E Scheduled Output
module.
These features can be configured through the RSLogix 5000 software.
Determine Module
Compatibility
The Scheduled Output module 1732E-OB8M8SR serves to provide high speed
scheduling of every output signal based on time scheduling. Time scheduling is
obtained via CIP synchronization (CIP Sync).
All outputs can be individually scheduled. Users shall be able to define the
number of outputs to be used for scheduling purposes, leaving the other outputs
for use as “normal” outputs.
When designing a system using this module, you must consider:
• the voltage necessary for your application
• whether you need a solid state device
• current leakage
• if your application should use sinking or sourcing wiring.
For more information on compatibility of other Rockwell Automation products
to modules, see the I/O Systems Overview, publicat
.
Topic
Page
Determine Module Compatibility