Rockwell Automation 1760 Pico GFX-70 Controllers Quick Start User Manual

Page 56

Publication 1760-QS002A-EN-P - April 2004

7-14 Lesson 5

1. Move from the circuit diagram to the function block diagram via View,

Function Blocks or directly via the

button.

2. Return to the Circuit Diagram View by clicking the

button once

more.

You may wonder how you can display the states of the second device in
PicoSoft Pro. Do I have to disconnect the PC from the device and reconnect
the 1760-CBL-PC02 somewhere else? No, it is much easier to do.

1. Choose Communication, Device, Pico-Link Operation to select

Device 2. PicoSoft Pro will then fetch its data for display from Device
number 2 (Pico-Link ID 2) and not from the master.

Circuit diagram display of the slave program in device 2 (when
pressing cursor button P1)

2. After the cursor button P1 has been pressed ten times on Device 2, the

Q1 output of the third device (Pico-Link 3) is set to logic “1”.

Congratulations!

You have now successfully worked through the PicoSoft Pro Beginners'
Course. Hopefully, you have acquired some idea of how simple and versatile
the Pico controllers are to use.