Rockwell Automation 1760 Pico GFX-70 Controllers Quick Start - Manual (Page 44)

Publication 1760-QS002A-EN-P - April 2004
7-2 Lesson 5
Since PicoSoft Pro sets everything automatically for you, that's all you have to
do.
But what did PicoSoft Pro do for us? Let's start once more from the beginning
to examine the steps in more detail.
1. Close the current project via File, Close without saving it.
2. Open a new project via File, New.
3. As described above, we then add a 1760-LDFC CPU module, a
1760-DUB display module and a 1760-IB12XOB4IOF I/O module to
the Workbench using drag and drop.
After it has been placed on the Workbench, this first device will be
shown without any Pico-Link ID.
4. Repeat the above configuration procedure for the next device.
The following Pico-Link ID dialog will appear after you have dragged
the processor onto the Workbench and released the mouse button.
Assign a Pico-Link ID for