Rockwell Automation 1760 Pico GFX-70 Controllers Quick Start - Manual (Page 26)

Publication 1760-QS002A-EN-P - April 2004
4-4 Lesson 3
Once the settings described above have been made, you can then
start the simulation by clicking the Play button in the Toolbar.
Watch the effects of the modified functions of the I input simulator.
You can then end the simulation by clicking the Stop button .
Changes in the I/R Function
dialog change the switching
characteristics of the I or R input
simulators.
1: “Momentary make contact”
function
2: “Momentary break contact”
function
I input simulator for the device.