Rockwell Automation 1329I DeviceNet Option FRN 1.XXX - Manual (Page 31)

Chapter
4
Configuring a Scanner
This chapter provides information and instructions for configuring an
SLC 500 controller with a 1747-SDN scanner to communicate with a 1329I
Integrated drive/motor using a DeviceNet option. It includes information on
the following:
Example Network This chapter provides the steps that are needed to configure the simple
network that is illustrated in
Figure 4.1 .
Figure 4.1 Example DeviceNet Network
Topic Page
Example Network 4-1
Setting Up the Scan List 4-2
Mapping the 1329I Unit’s Data in the Scanner 4-5
Saving the Configuration 4-8
Node 0
SLC-500 Controller
with 1747-SDN Scanner Node 62
Computer with 1770-KFD
running DeviceNet Manager
Node 1
1329I Integrated Drive/Motor
with DeviceNet Option