Rockwell Automation 1413-ME-PEA Capacitor Bank Controller - Series B - Manual (Page 58)

Publication 1413-UM001C-EN-P - May 2006
56 Add Special Functionality
Open_8 B3/07 This flag indicates that Contactor #8 has been activated. (0
= Open, 1 = Active) Bit Read
Open_9 B3/08 This flag indicates that Contactor #9 has been activated. (0
= Open, 1 = Active) Bit Read
Open_10 B3/09 This flag indicates that Contactor #10 has been activated. (0
= Open, 1 = Active) Bit Read
Step_Available_1 B64/50 This flag indicates that the step is available to participate in
automatic control. (1 = Available) Bit Read
Step_Available_2 B64/51 This flag indicates that the step is available to participate in
automatic control. (1 = Available) Bit Read
Step_Available_3 B64/52 This flag indicates that the step is available to participate in
automatic control. (1 = Available) Bit Read
Step_Available_4 B64/53 This flag indicates that the step is available to participate in
automatic control. (1 = Available) Bit Read
Step_Available_5 B64/54 This flag indicates that the step is available to participate in
automatic control. (1 = Available) Bit Read
Step_Available_6 B64/55 This flag indicates that the step is available to participate in
automatic control. (1 = Available) Bit Read
Step_Available_7 B64/56 This flag indicates that the step is available to participate in
automatic control. (1 = Available) Bit Read
Step_Available_8 B64/57 This flag indicates that the step is available to participate in
automatic control. (1 = Available) Bit Read
Step_Available_9 B64/58 This flag indicates that the step is available to participate in
automatic control. (1 = Available) Bit Read
Step_Available_10 B64/59 This flag indicates that the step is available to participate in
automatic control. (1 = Available) Bit Read
Power Factor Control
KVAR_Lead_Wait_2_T
rip B56:0/7 This flag indicates that a step is waiting to be tripped. Bit Read/Write
KVAR_Lag_Wait_2_Ad
d B56:0/8 This flag indicates that a step is waiting to be added. Bit Read/Write
KVAR_Lead_Trip_Step B56:0/3 This flag commands the system to trip the selected step. Bit Read/Write
KVAR_Lag_Add_Step B56:0/4 This flag commands the system to add the selected step. Bit Read/Write
Trip_Step_Num N58:0 This register holds the number of the step to release. Int Read/Write
Use_Step_Num N58:1 This register holds the number of the step to activate. Int Read/Write
PM1 Data
PM_1_I1 F11:0 PM #1, L1 Current A Read
PM_1_I2 F11:1 PM #1, L2 Current A Read
PM_1_I3 F11:2 PM #1, L3 Current A Read
PM_1_L12 F11:3 PM #1, L1-L2 Voltage V Read
User-defined Variables
Symbol Datapoint Description Datatype Units Access
Privilege