Rockwell Automation 1413-ME-PEA Capacitor Bank Controller - Series B - Manual (Page 51)

49 Publication 1413-UM001C-EN-P - May 2006
Chapter
4
SCADA Interface
Power-circuit Parameters The capacitor bank controller reads power-circuit parameters from the
Powermonitor meters and makes that data available in its data table
for use by other applications such as SCADA or HMI systems.
The following table lists the Powermonitor meter data available in the
controller. The symbol x indicates the Powermonitor meter number.
Addresses related to Powermonitor meter no. 1 begin with F11:0,
addresses related to Powermonitor meter no. 2 begin with F12:0.
Additional data is available in systems with the Ethernet
Powermonitor meter option.
Available Powermonitor Meter Data
Address Parameter
F1x:0 L1 Current
F1x:1 L2 Current
F1x:2 L3 Current
F1x:3 L1-L2 Voltage
F1x:4 L2-L3 Voltage
F1x:5 L3-L1 Voltage
F1x:6 Frequency
F1x:7 L1 Real Power
F1x:8 L2 Real Power
F1x:9 L3 Real Power
F1x:10 Total Real Power
F1x:11 L1 Reactive Power
F1x:12 L2 Reactive Power
F1x:13 L3 Reactive Power
F1x:14 Total Reactive Power
F1x:15 L1 Power Factor
F1x:16 L2 Power Factor
F1x:17 L3 Power Factor
F1x:18 Total Power Factor
F1x:19 Measured Total %THD Voltage