Rockwell Automation 160 AC DRIVE SER B/FRN 5-6.XX User Manual

Page 45

Appendix A – Specifications and Accessories

A-2

Table A.3 – Specifications For All Controller Ratings

Input/Output Ratings (All Controller Ratings)

Output Voltage (V)

Adjustable from 0V to input voltage

Output Frequency (Hz)

0 to 240 Hertz Programmable

Efficiency (%)

97.5% (Typical)

Transient Protection

Standard 2 kV (Optional 6 kV using MOV module). See accessories on page A-5.

Environmental Specifications (All Controller Ratings)

Enclosure

IP 20

Ambient Temperature

_C to 50_C

Storage Temperature

–40

_C to 85_C

Relative Humidity

0 to 95% (non condensing)

Vibration

1.0 G Operational – 2.5 G Non-operational

Shock

15 G Operational – 30 G Non-operational

Altitude

1,000 m (3,300 ft.) without derating

Control Inputs (All Controller Ratings)

Control Input Type

For dry contact closure input – the controller has an internal 12V power supply that provides

10mA (typical) current flow.

Also accepts open collector/solid state inputs (sinking) with maximum leakage current of 50

mA.

Optional 24V DC interface allows use of 24V DC sinking inputs.

See page A-4 for ordering information.

Start, Stop, Forward/Reverse

Configurable inputs for 2 or 3 wire control

SW1, SW2, SW3
(Preset Speed Model only)

Configurable Inputs for control of 8 preset speeds and 2 Accel/Decel times

Programmable Input

TB3-8 can be configured to select:

Accel/Decel Times

Controller Enable/Disable

Local/Remote

Approvals and Standards Compliance (All Controller Ratings)

Approvals

ОО

UL508C

CSA 22.2

ОО

Designed to meet these standards

IEC 146–1–1
FCC Class A

➀

and B

➀

VDE 0871

➀

and 0875

➀

Control Inputs (Analog Signal Follower only – All Controller Ratings)

External Speed Potentiometer

1K to 10K Ohms, 2 Watts Minimum

Analog Input (4 to 20mA)

Input lmpedance 250 Ohms

Analog Input (–10 to +10V DC)

Input Impedance 100K Ohms

Control Output (All Controller Ratings)

Programmable Output
(Form C Relay contact)

Resistive rating: 0.4A @125V AC, 0.2A @ 230V AC, 2A @ 30V DC
Inductive rating: 0.2A @ 125V AC, 0.1A @ 230V AC, 1A @30V DC

➀

With external components.