Schroth Racing All models - Competition Instructions - Manual (Page 59)

C A R E A N D M A I N T E N A N C E
Inspection
• Inspect the harness belt thoroughly for damage before each use.
• Make sure that the inspection of the belt is included with regular
check-ups of the race car and its equipment.
• Regularly check correct torque of bolts.
• Check for expiration date of the racing harness as it applies to the
regulation of your sanctioning body and/or the FIA, SFI or NASCAR
tag, prior to each use.
Cut and Abrasion as shown here require an immediate belt exchange
Never use any belt that is cut, torn or damaged in any way!
Replace it immediately, cut the old belt in half, and discard the
old belt so that it cannot be used again. Cuts, tears and other
damage to the belt will greatly reduce its effectiveness, may
cause it to fail, and may result in severe injuries or death.
C LEANING
• To clean the harness belt, use only mild soap and warm water.
• Never use solvents or other cleaning solutions, they can weaken the
webbing or stitch pattern.
• Never use chemical solvents or cleaning solutions to clean the rotary
or push button buckle. The high impact resistant polycarbonate [PC]
material is sensitive to any kind of hydrocarbons, also to spray
cleaners containing hydrocarbons.
- 58 -