Schroth Racing All models - Competition Instructions - Manual (Page 54)

• Tighten shoulder belts securely.
• Make sure the shoulder harness is properly positioned on HANS
® if
worn. Adjuster must be on lower 70 mm of the HANS ® yoke.
• For adjuster positioning using a HANS specific double-shoulder belt
see instructions under paragraph 3.5 in this section.
3.2 P ROFI F- TYPE MODELS
• Loosen the shoulder belts so they will not pull-up the rotary buckle
when engaged.
• Engage lap belt and tighten securely.
• Make sure the rotary buckle is well centered to the occupant’s body,
• run anti-sub straps flat over upper thighs,
• thread end loop straps from underneath through D-rings on lap belts.
• Hook end loop straps accordingly into left and right shoulder belt
latches and secure shoulder belt latches in rotary buckle.
• Make sure left and right shoulder belts are not interchanged.
R I G H T W R O N G
• Tighten anti-sub straps (if adjusters are available) first.
- 53 -