Schroth Racing All models - Competition Instructions - Manual (Page 49)

Wrap mounted shoulder straps must be braced on each side so
that the webbing can not move from side to side. Failure to secure
the sideward movement of the wrap mounted shoulder straps
could cause the belts to slide off Head and Neck Support,
eliminating its effectiveness.
Never use bars of lower grade than the original. Lower grade bars
may be too weak and may fail during an accident.
SEVERE INJURIES OR DEATH MAY OCCUR.
50 mm [2”] webbing of a HANS ® specific shoulder belt installed to a
elbow bracket system with elbow bracket installed reversal to create
50 mm [2”] distance.
• In case of a reversed installed elbow bracket, shorter bars but such of
same diameter can be used.
• Replacement bars must be at least of same grade than the original
one.
- 48 -