Schroth Racing All models - Competition Instructions - Manual (Page 32)

7. In this case, the strap end now protrudes from the down side of the
LV 4.
The webbing must be wrapped tightly!
F LEXI B ELT ™ ASSEMBLING VIA L IGHT W EIGHT W RAP S YSTEM
• Flexi Belt™ allows you to assemble the lap belt either as a pull-up or a
pull-down version.
• As end brackets you can assemble SCHROTH snap-hook bracket or
any other SCHROTH bracket with a 50 mm (2”) webbing slot.
• For swivelling bolt-on installation, use the wrap bracket shown in
section Bolt-in Wrap Bracket assembling. The wrap hardware LV 4 is
not to be used with this bracket. Follow assembly instructions for Bolt-
in Wrap Bracket assembling.
- 31 -