Schroth Racing All models - Competition Instructions - Manual (Page 30)

3. fold back up from the
body side through slot 1
and back down through
slot 2
4. fold back through slot 3
and finally through slot 1
5. pull the lap belt firmly to
ensure the wrap is properly
tight.
100mm [4“]
6. make sure the protruding strap end is at least 100 mm [4”] long
The webbing must be wrapped tightly!
The protruding end must be sandwiched between the load taking
strap end and an inner webbing fold through slot 1.
If this is not achieved, check again for proper routing.
- 29 -