MacDon PW8 Pick-Up Header - Manual (Page 59)

OPERATION
Detaching from New Holland CR/CX Combine
1. Choose a level area. Position header slightly off the
ground. Stop engine and remove key.
WARNING
Stop combine engine and remove key before making
adjustments to machine. A child or even a pet could
engage the drive.
2. Push in lock button (C), and pull handle (B) upward to
release coupler (A).
3. Remove coupler (A) from header receptacle.
Figure 3.53
4. Position coupler (A) onto storage plate (B) on combine.
5. Disconnect electrical connector from header, and place
in storage cup (C) on combine.
Figure 3.54
169489
51
Revision A