MacDon PW8 Pick-Up Header - Manual (Page 117)

MAINTENANCE AND SERVICING
5. Reconnect hoses (A) to motor.
6. Install previously removed cinch straps.
7. Close endshield. Refer to 3.3.2 Closing LH Endshield,
page 26
Figure 4.48
Removing Hydraulic Motor Hoses
1. Lower pick-up to the ground, and lower the hold-down
completely.
DANGER
Stop engine and remove key from ignition before
leaving operator’s seat for any reason. A child or
even a pet could engage an idling machine.
2. Shut down combine, and remove key from ignition.
3. Open left endshield (A). Refer to 3.3.1 Opening LH
Endshield, page 25
Figure 4.49
169489
109
Revision A