2installing lh endshield, Installing lh endshield, 2 installing lh endshield – MacDon PW8 Pick-Up Header User Manual

Page 102

4. Remove nut (A) securing support (B) to endshield (C),

and move support (B) off the bolt.

Figure 4.14

5. Swing endshield (A) fully back and loosen nuts (B)

on clips (C) at back of endshield so that clips can
disengage slots in header frame.

6. Move endshield (A) away from header.

Figure 4.15

4.5.2

Installing LH Endshield

1. Hold endshield (A) up to frame and insert clips (C) into

slots in header frame.

2. Tighten nuts (B) on clips (C) just enough to hold

endshield in place .

Figure 4.16: Attaching Endshield

169489

Revision A