MacDon PW8 Pick-Up Header - Manual (Page 172)

MAINTENANCE AND SERVICING
5. Connect hose (A) to master cylinder (B).
6. Secure hose to cylinder with cable tie (C).
Figure 4.178
7. Secure hose with clips (A) and cinch straps (B).
Figure 4.179
8. Install cover (B) and tighten bolts (A).
Figure 4.180
9. Close endshield. Refer to Section: 3.3.2 Closing LH
Endshield, page 26 .
10. Bleed cylinders and lines. Refer to Section: Bleeding
Cylinders and Lines, page 159
169489
164
Revision A