MacDon PW8 Pick-Up Header - Manual (Page 158)

MAINTENANCE AND SERVICING
9. Secure bearing (A) with lock nuts (B).
10. Install the lock collar (C) onto the bearing, and rotate it
clockwise (counterclockwise for right side) until tight.
11. Tighten the setscrew with a 6 mm Allen key.
12. Remove support from under the roller.
13. Tension the drapers. Refer to Section Adjusting Draper
Belt Tension on Front Deck, page 69 .
Figure 4.146: Left Side – Right Side Opposite
169489
150
Revision A