MTS Acumen - Manual (Page 23)

Site Precautions
Warning :
The equipment is designed to operate in an environment where precautions have to be taken
to minimize hazards to personnel and the equipment
Ignoring hazards and failing to take necessary precautions can result in injury or death to
personnel, and damage to equipment.
Do not install or operate the system equipment in a hazardous environment.
Warning :
Hazardous situations or conditions can arise suddenly and without warning at all parts of the
system.
If immediate action is not taken to remove the hazard or remove personnel from the hazard,
serious injury or death can result.
Do not operate the system unless you have full view of the equipment. If operation of the
system takes place in a remote control room (separated from the equipment), it should be
designed so that the operator has full and unobstructed view of the system equipment. Make
sure that ergonomic issues are considered in the layout of the operating area to limit operator
stress and fatigue.
Warning :
Working environments that are not designed with appropriate ventilation, lighting, heating and
cooling or non-ergonomic equipment, furniture, and equipment/furniture placements can result
in operator fatigue and stress.
Operator fatigue and stress can result in operator errors, which can result in injury to personnel
or damage to the equipment and/or specimen.
Make sure that lighting, heating, cooling, and ergonomic issues are considered in the layout
of the operating area to limit operator stress and fatigue.
MTS Acumen ™ | 23
Safety Overview