MTS Acumen - Manual (Page 123)

Important: Specimen Protection Limits are active only while you are in the Install Specimen
node. They are automatically disabled when you leave the Install Specimen node. You do
not need to manually turn them off when you are done installing the specimen.
3. Place the spring on the bottom platen.
4. Position the crosshead so that there is 1-2 mm clearance between the upper platen and the spring.
Crosshead Locks and Lift Controls
Description Item
Crosshead Locks (Locked) 1
Crosshead Lift Controls 2
MTS Acumen ™ | 123
Running the Example Spring Test