Lenze TCF Series - Manual (Page 37)

NO. PARAMETER NAME RANGE OF ADUSTMENT
FACTORY
DEFAULT
(NOTE 1)
11
TB-13B FUNCTION
SELECT
NONE (01), 0-10 VDC (02), 4-20 mA (03),
NONE (01) PRESET SPEED #2 (04), DECREASE FREQ (05),
JOG FORWARD (06), AUXILIARY STOP (07)
12
TB-13C FUNCTION
SELECT
NONE (01), 0-10 VDC (02), 4-20 mA (03),
NONE (01)
PRESET SPEED #3 (04), INCREASE FREQ (05),
EXTERNAL FAULT (06), REMOTE KEYPAD (07),
DB FAULT (08), JOG REVERSE (09),
ACCEL/DECEL #2 (10)
13 TB-15 OUTPUT (SEE PARAMETER 6 - TB-14 OUTPUT) NONE (01)
14 CONTROL
TERMINAL STRIP ONLY (01),
TERMINAL STRIP
ONLY (01)
REMOTE KEYPAD ONLY (02),
TERMINAL STRIP OR REMOTE KEYPAD (03)
15 SERIAL LINK
DISABLE (01), 9600, 8, N, 2 WITH TIMER (02),
9600, 8, N, 2 WITHOUT TIMER (03),
9600, 8, E, 1 WITH TIMER (04), 9600, 8, N, 2
9600, 8, E, 1 WITHOUT TIMER (05), WITH TIMER (02)
9600, 8, O, 1 WITH TIMER (06),
9600, 8, O, 1 WITHOUT TIMER (07)
17 ROTATION
FORWARD ONLY (01), FORWARD
FORWARD AND REVERSE (02) ONLY (01)
18 MTR OVERLOAD TYPE SPEED COMP (01), NO COMP (02) SPEED COMP (01)
19 ACCELERATION TIME 0 .1 - 1300 .0 SEC 20 .0 SEC
20 DECELERATION TIME 0 .1 - 1300 .0 SEC 20 .0 SEC
21 DC BRAKE TIME 0 .0 - 999 .0 SEC 0 .0 SEC
22 DC BRAKE VOLTAGE 0 .0 - 30 .0 % 0 .00%
23 MINIMUM FREQUENCY 0 .0 - MAXIMUM FREQUENCY 0 .0 Hz
24 MAXIMUM FREQUENCY MINIMUM FREQ - 240 .0 Hz 60 .0 Hz
25 CURRENT LIMIT 50 - 200 % (NOTE 2) 200%
26 MOTOR OVERLOAD 30 - 100 % 100%
27 BASE FREQUENCY 25 .0 - 500 .0 Hz 60 .0 Hz
NOTE 1: Factory defaults are shown for a 60 Hz base frequency . Refer to Parameter 48 for 50 Hz base frequency .
NOTE 2: If LINE VOLTAGE is set to LOW, maximum setting is 167% .
33