Lenze E84Dxxxx - Manual (Page 88)

13 Parameter reference
13.1 Parameters relevant for communication
88
Lenze · Decentralised frequency inverter 8400 protec (EtherNet/IP™ option) · Communication Manual · DMS 3.0 EN · 07/2014 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
13 Parameter reference
This chapter supplements the parameter list and the table of attributes in the reference manual and
the »Engineer« online help for the Inverter Drives 8400 protec by the EtherNet/IP parameters.
13.1 Parameters relevant for communication
This chapter lists the EtherNet/IP parameters in numerically ascending order.
C13000
C13001

Reference manual / »Engineer« online help for Inverter Drives 8400 protec
Here you will find general information on parameters.
Parameter | Name:
C13000 | IP Address
Data type: UNSIGNED_8
Index: 11575
d
= 2D37
h
Setting of the IP address
 Setting the IP configuration of the Inverter Drive 8400 protec ( 28)
Setting range (min. value | unit | max. value)
0 255
Subcodes Lenze setting Info
C13000/1 192 IP address (most significant byte)
C13000/2 168 IP address
C13000/3 124 IP address
C13000/4 16 IP address (least significant byte)
 Read access  Write access  CINH  PLC STOP  No transfer  PDO_MAP_RX  PDO_MAP_TX  COM  MOT
Parameter | Name:
C13001 | Subnetwork Mask
Data type: UNSIGNED_8
Index: 11574
d
= 2D36
h
Setting of the subnet mask
 Setting the IP configuration of the Inverter Drive 8400 protec ( 28)
Setting range (min. value | unit | max. value)
0 255
Subcodes Lenze setting Info
C13001/1 255 Subnet mask (most significant byte)
C13001/2 255 Subnet mask
C13001/3 255 Subnet mask
C13001/4 0 Subnet mask (least significant byte)
 Read access  Write access  CINH  PLC STOP  No transfer  PDO_MAP_RX  PDO_MAP_TX  COM  MOT