Lenze E84Dxxxx - Manual (Page 16)

5 Installation
5.1 Network topology
16
Lenze · Decentralised frequency inverter 8400 protec (EtherNet/IP™ option) · Communication Manual · DMS 3.0 EN · 07/2014 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
5 Installation
5.1 Network topology
It is typical of EtherNet/IP to have a rather free topology the limiting factor of which is large
message latencies due to e.g. switches connected in series.
 Internal switch latency ( 15)
The combination of a line and a stub is useful for system wiring.
EtherNet/IP supports the following topologies:
• Line
[5-1] Line topology (S = scanner, A = adapter)
• Switch / star
[5-2] Switch / star topology (SW = switch, A = adapter)

Mounting instructions for the Inverter Drive 8400 protec
Here you will find detailed information on the mechanical and electrical installation of
the device.
Hardware manual for Inverter Drives 8400 protec
Here you can find detailed information on ...
• the digital and analog inputs/outputs;
• the relay output;
• the integrated safety system (safety option);
• the wiring of the terminals.
Observe the notes and wiring instructions contained in this documentation!
E94AYCEO008
A A
S
A A
E94AYCEO005
SW
A A A