Lenze E84Dxxxx - Manual (Page 80)

12 Error messages
12.2 Possible causes and remedies
80
Lenze · Decentralised frequency inverter 8400 protec (EtherNet/IP™ option) · Communication Manual · DMS 3.0 EN · 07/2014 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
EtherNet/IP: Internal Error [0x01bc6100]
EtherNet/IP: Internal Error [0x01bc6101]
EtherNet/IP: Invalid Parameter Set [0x01bc641f]
EtherNet/IP: Error: Lenze Setting Loaded [0x01bc6420]
EtherNet/IP: Invalid Configuration [0x01bc6430]
EtherNet/IP: Invalid IP Parameter [0x01bc6533]
Response (Lenze setting printed in bold) Setting: not possible
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
Device is defective. Send the device and a description of the fault to Lenze.
Response (Lenze setting printed in bold) Setting: not possible
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
Device is defective. Send the device and a description of the fault to Lenze.
Response (Lenze setting printed in bold) Setting: not possible
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
No active parameter set could be loaded. Download application again (including module).
Response (Lenze setting printed in bold) Setting: not possible
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
Access to parameter set in memory module via inverter
was not successful.
Download application again (including module).
Response (Lenze setting printed in bold) Setting: not possible
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
Module configuration is faulty. Check and correct module configuration.
Response (Lenze setting printed in bold) Setting: not possible
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
One or more IP parameters are faulty. Check and correct IP configuration.
 Setting the IP configuration of the Inverter Drive 8400
protec ( 28)