Lenze E84AVSCx 8400 StateLine C - Manual (Page 17)

Lenze · 8400 StateLine · Operating instructions · from Firmware V06.00 · DMS 1.2 EN · 12/2012 · TD05
17
5 Before commissioning
5.2 General notes on parameters
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Multilingualism
All texts displayed in the keypad are in English.
From version 11.00.00 onwards, the most important menus as well as diagnostic and configuration
parameters can are also available in German and French. To set a different language, select the
Language selection menu item in the main menu of the keypad.
User level
From version 12.00.00 , the extension of the menus, submenus and codes shown in the keypad can
be adapted by selecting the "user level" in C00001/1:
• Standard user level (Lenze setting): Only the most important menus and codes are displayed in
the keypad.
• Expert user level: All menus and codes are displayed in the keypad.
• Service user level: Only for the purpose of service (Lenze Service).
After changing the user level, the menus in the keypad are restructured according to the selected
user level. The parameters of plugged-in communication module are always shown completely
independent of the set user level.
• The multilingual texts are stored in the
controller and do not have to be loaded into the
device.
• For reasons of disc space, only the most
important menus and parameters as well as the
error messages are available in several
languages.
Language
ESC
Français
Deutsch
English
OK