Landoll HSB 71-1 through 131-1 SOIL BUILDER Coulter Chisel - Extended Frame - Manual (Page 40)

1K705 Page 36
M achine S pecifications
M achine S pecifications
(Subject to change without notice)
Model Designation
Basic model is denoted by :
HSB
- Extended Frame Soil Builder with Hydraulic Depth Controlled Coulters
HSBH
- Extended Frame Soil Builder with Hydraulic Coulters, & Hard-Surface 3-piece 4” Twisted Shovels
HSBA
- Extended Frame Soil Builder with Hydraulic Coulters, & Hard-Surface 1-piece 4” Twisted Shovels
The number following relates to the shank combination of the machine.
71-1 = 7 shanks, 91-1 = 9 shanks, 111-1 + 11 shanks, 131-1 = 13 shanks
Basic Machine Specifications
Main frame ...................................................... 5’ x 3” and 4” x 4” Steel Tubing, weighted, 139” Long
Hitch ...................................................... Clevis/Hammer Type
Machine Width ...................................................... 7-shank = 9’ 4” ; 9-shank = 11’ 10-3/8”
Machine Height ...................................................... 5’ Operating; 6’ Transporting
Machine Length ...................................................... 20’
Tires ...................................................... (2) 11L x 15 8-Ply Tires
...................................................... 2 sets, 11L x 15 8-Ply Tires Tandem Wheel w/ Walking Beam
Coulters ...................................................... 20” gangs on 7 1/2” Spacing
Coulter Control ...................................................... Hydraulically controlled coulter gangs
...................................................... Manual control with stepped pin & hole adjustment
Shank Assembly ...................................................... 15” Spacing
Shank Underframe Clearance .......................... 29”
Shank Types ..................................................... Spring Clamp
...................................................... Rigid Clamp
Shank Leg Type ............................................... 2” wide x 1 1/4” Thick Parabolic Shank
Point Options ...................................................... Standard 4” 3-piece Hard Surface Twisted Shovels
...................................................... Standard 4” 1-piece Hard Surface Twisted Shovels
...................................................... 3” Twisted Shovels
...................................................... 2” Chisel Point
...................................................... 16” Sweep
791rev5-30-05