Landoll HSB 71-1 through 131-1 SOIL BUILDER Coulter Chisel - Extended Frame - Manual (Page 29)

1K705
Mounting of shanks, points and shovels
• Assemble the left hand and right hand shovels to
the shanks with the plow bolts provided inside
their box assemblies.
• The right hand, three piece type of shovel
assembly is illustrated at right. On all machine
sizes you will have one more right hand shovel
than left hand. The components are stamped
“R” or “L” for identification.
• For assembly of the one piece shovels,
bolt onto shanks with the plow bolts provided.
Figure 10a
Figure 10b
Figure 10c
Page 27 791rev5-30-05
Bolt, Lockwasher and
Nut are part of Spring
Clamp Assembly
U-Bolt, 3/4-10
Lock Washer, 3/4
Nut, Hex 3/4-10
Mount Shank Assembly to Frame
Spring
Shank
Mount
U-Bolt, 5/8-11
Lock Washer, 5/8
Hex Nut, 5/8-11
Mount shank to
Spring Shank Mount
2K116 Iso
Plow Bolt, 1/2” x 3”
Flanged Lock Nut, 1/2”
Rigid Shank
Mount
Flanged Lock Nut,
1/2-13
Frog
Point
Plow Bolt,
1/2-13 x 1 -1/2
Plow Bolt,
1/2-13 x 3
Shank
4” Moldboard
Plate
Plate
5/8-11 x 8 3/4-10 x 7-1/2
Mount Rigid Shank
Assembly to Frame
Part of Spring Clamp Assembly
Lock Washer, 3/4
Nut, Hex 3/4-10 Lock Washer, 5/8
Hex Nut, 5/8-11
1”
1”
For normal operation the nuts on the spring
mounting should be tightened so one inch
of thread is exposed.
It is easier to bolt the points to the shank
before mounting them to the machine.
•
•