Landoll HSB 71-1 through 131-1 SOIL BUILDER Coulter Chisel - Extended Frame - Manual (Page 12)

1K705
LUBRICATION
On your Brillion Soll Builder the
following grease fittings should
be greased after each 8 hours
of operation.
Also the four pins on the
links from rockshaft to the
wheel arms.
Each season repack the wheel
bearings and the walking beam
pivot bearings on machines
equipped with walking beam axles.
The four cast bearings on the
coulter gangs, the six steel
bearings on the wheel arms
and rockshaft and the center
bearing on the rockshaft.
8
HRS.
8
HRS.
Page 10 791rev5-30-05