Landoll HSB 71-1 through 131-1 SOIL BUILDER Coulter Chisel - Extended Frame User Manual
Page 21
1K705
Center Bearing
Pin, 1 1/4 x 6 1/8”
(1) Roll Pin, 1/4 x 2”
in Collar
Figure 2b-T
HHCS, 3/4-10 NC x 5-1/2”
Lockwasher, 3/4”
Nut, 3/4-10 NC
Link
Page 19
791rev5-30-05
Tire, 11L x 15, 8 Ply
Wheel Bolt, 1/2-20 NF
Coat the center bearing with grease and install it
on the rockshaft between the cylinder lift arms,
with the chamfered end toward the front of the
machine. Bolt in place with 3/4-10NC X 5-1/2”
capscrews, lock washers and nuts.
Install the links, oriented so the grease zerks are
accessible rearward, between the wheel arms and
rockshaft with 1-1/4 x 6-1/8 pins and one 1/4 x 2
roll pin per pin. Keep in mind that the roll pin goes
thru the collar with the hole. Figure 2b-T.
Mount the tire and rim assemblies to the wheel
arms with wheel bolts, 1/2-20NF x 1”.
Grease Fitting
(9-Shank Configuration
Pictured)