Landoll HSB 71-1 through 131-1 SOIL BUILDER Coulter Chisel - Extended Frame - Manual (Page 13)

1K705
MAINTENANCE
Clean dirt, weeds, and any other foreign material
from the coulter-chisel before storing at the end of
the season. Repaint areas where paint has worn
If your machine
is equipped with
spring cushion
shanks, grease the
shank pivot after
each 8 hours of
operation.
On machines
equipped with
hydraulic coulter
adjustment,
grease the cast
bearings daily.
Coat the cylinder rods with grease to prevent the
rods from rusting if the machine will be stored
outside or for a prolonged period of time.
Grease the ratchet jack as
needed to prevent rusting, .
off. Repair or replace any broken or damaged
parts. Store in a dry, protected place.
8
HRS.
Daily
Page 11 791rev5-30-05